| E3514
1.5" I.D. x 45°, 4-ply silicone elbow with 7" legs. E3515 1.5" I.D. x 3 ft., 4-ply silicone hose. E3516 1.5" I.D. x 90°, 4-ply silicone elbow with 8" legs. E3517 1.75" I.D. x 3 ft., 4-ply silicone hose. E3518 1.75" I.D. x 90°, 4-ply silicone elbow with 8" legs. E3519 1.75" I.D. x 45°, 4-ply silicone elbow with 7" legs. |
 |
| E3385
1.5" O.D. x 3 ft., aluminum tube with hose beaded ends. E3386 1.5" O.D. x 90°, aluminum elbow with 4" & 12" beaded legs. E3395 1.75" O.D. x 3 ff, aluminum tube with hose beaded ends. E3396 1.75" O.D. x 90°, aluminum elbow with 3" & 6" beaded legs. |
 |
| Evans
Wave Band Hose Clamps are designed for thermal expansion and contraction.
The 360° concave liner is attached to the inside of the band where the expansion
occurs. E2150 Wave-Band hose clamp, stainless steel, 1.5" to 2" clamping range. E2175 Wave-Band hose clamp, stainless steel, 1.75" to 2.25" clamping range. E2199 Hose clamp tightening tool. |
 |
 On
tightening, the wave-shaped band causes maximum compression of the rubber
at the two beads. The rubber is squeezed inward toward the edges as the
rubber between the two beads is only marginally affected. It Retains its
elasticity and acts as an "0" ring. |
 On
heating the band the "0" ring flattens out. As it cools down it will assume
its original shape and seal against the end fitting. The design of the clamp
makes it particularly suitable for soft hoses with relatively thick walls. |
|
* ORDER Go to our secure order
page for Online
purchases - or phone toll free 888 990 2665 *
|
 |
|
 |
This
page is part of a framed web site. Click the button to reload the site
from the intended starting point. |